Ruger Issues Product Safety Bulletin

This statement was issued by Chris Killoy, President/CEO of Sturm, Ruger & Co., Inc.

“Ruger has issued a Product Safety Bulletin for 9mm Ruger American® pistols with serial number prefixes ‘860’ and ‘862.’ We have recently discovered that these pistols may exhibit premature wear of the locking surfaces between the slide and barrel, which, if ignored, can result in a crack developing near the ejection port of the slide. This typically does not occur at round counts below 10,000 rounds. The condition is easily
identified during routine maintenance and cleaning, and the crack should be visible long before the pistol becomes unsafe to shoot. Ruger American® Pistols chambered in .45 Auto are NOT subject to this Safety Bulletin. Complete details regarding the Safety Bulletin appear in the attached Product Safety Bulletin and online at While only a small percentage of pistols appear to be affected, out of an abundance of caution and in the interest of safety, we are requesting that owners of Ruger American® Pistols chambered in 9mm inspect their pistols for excess wear and/or cracks. If either of those conditions are present or if you are uncertain, we
invite you to visit our website at and sign up for the retrofit.”

The Product Safety Bulletin follows:


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s